One important note for you fans (Petrol RC Cars) is to make sure you just keep it at half throttle, without revving the car or you will damage the engine and limit the performance of the machine should not be too hot, which is why you must be patient and follow the above .
This is only a short time to do and I believe it's worth the little extra effort. Priming the engine with nitro fuel is quite easy and there are several ways to do this. When you start the engine pull-on Nitro RC Cars, see a clear line of fuel is a clear plastic tube so you can check to see if the fuel reaches the carburetor.
if the fuel does not flow all the way though and then check that there are no kinks in the pipe anywhere, if this is ok then you can prime the machine by placing one finger over the exhaust or air intake of only a few seconds! While the pull-start the car until you see the fuel reach the engine. Make sure you visit their official site at http://www.petrolrccars.co.uk for more detailed information and clear.
0 komentar:
Posting Komentar